BioPav 20s

$0.00$88.99

Biopav20S is a release agent for truck boxes and rubber tire rollers. Once applied, it will form a thin protective film that will prevent asphalt from sticking and building up in truck boxes and on rubber tire rollers. Truck boxes will also be easier to unload. For truck boxes, apply at the asphalt plant before loading or on the job site after unloading. For rubber tire rollers apply at regular intervals with the integrated spray system or a pump-up hand sprayer.

Depending on the asphalt mix, the product can be diluted with water or applied at full strength.

BIOPAV 20S will not breakdown asphalt and is safe on rubber, plastic and painted surfaces.

Clear
SKU: N/A Category:

biopav-20

Application

To prevent asphalt from sticking and building up in truck boxes and on rubber tire rollers.
Also prevents the adhesion of clay, contaminated waste, sand, earth, aggregate and other materials.

At the Asphalt Plant

  • Ensure that the truck box is relatively clean with no apparent trace of bitumen/asphalt build-up.
  • Spray diluted with water or at full strength on all surfaces that come in to contact with asphalt with an appropriate application system. (asphalt release sprayer, diaphragm pump, diffuser/mixer/ foamer)
  • Proceed to load station. For best results, allow the product to dry for a few minutes. The drying time can vary depending on ambient temperature and weather conditions.
  • Repeat for each load.

At the job site

  • Once unloaded, make sure the truck box is relatively clean with no apparent trace of bitumen/asphalt accumulation.
  • Spray diluted with water or at full strength on all surfaces that come in to contact with asphalt with a pump-up hand sprayer or the truck’s pressure system.
  • The travel time to the asphalt plant will allow the BIOPAV20S to fully dry and produce an ultra-efficient protective coating.
    Once at the plant, do not apply any other release agents or diesel, they will have a negative effect on the performance of the BIOPAV 20S.
  • Proceed to load station.
  • Repeat for each load.

On Rubber Tire Rollers:

  • Depending on the asphalt mix, the product can be diluted with water or applied at full strength.
  • Ensure that the tires are relatively clean with no apparent trace of bitumen/asphalt build-up.
  • Apply a thin and uniform coating on the entire running surface of each tire.
  • Apply at regular intervals with the integrated spray system or a pump-up hand sprayer.
  • More frequent applications will be required at morning start up and during cold weather or windy conditions.

Eco-Friendly

  • 100% biodegradable
  • Made from totally renewable and recycled materials.
  • Does not contain any petroleum products.
  • User safe

Cost Effective/ Efficient:

  • Minimal quantities required.
  • Also effective with polymers.
  • Can be diluted with water.
  • Our most affordable formula. Contact us for volume offers and discounts.

Available in 20-litre pails, 205-litre drums, or 1000-litre tanks. (bulk also available)

tote

We recommend personal protection equipment with the use of all our products.

Weight N/A
Dimensions N/A
Quantity

5gal / 20L Pail, 45gal / 205L Drum, 220gal / 1000L Tote tank